|
[Sponsors] |
What should do for the error occurring when requesting total mesh diplacement in FSI |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
July 26, 2013, 22:01 |
What should do for the error occurring when requesting total mesh diplacement in FSI
|
#1 |
New Member
Join Date: Jun 2013
Location: California
Posts: 12
Rep Power: 12 |
Hello everbody
I am trying to model blood flow in arteries and struggling with errors. First of all in fluid model only simulations there occurs negative pressures when the analysis is transient with timesteps=0.01s and total time=0.05. When I model artery as linear elastic with characteristics of (E=2.7 MPa, Pois=0.45 and density=1120 kg/m3) FSI analysis completes the run, even the results may not be trustable. But when I choose artery as Mooney-Rivlin the program crashes. Solution terminates with error saying: Fatal error occurred when requesting Total | | Mesh Displacement for Interface. In Ansys out file the error is: One or more elements have become highly distorted. Excessive distortion of elements is usually a symptom indicating the need for corrective action elsewhere. Try ramping the load up instead of step applying the load (KBC,1). You may need to improve your mesh to obtain elements with better aspect ratios. Also consider the behavior of materials, contact pairs, and/or constraint equations. If this message appears in the first iteration of first substep, be sure to run shape checking of elements. Inlet blood velocity=18.2 cm/s Outlet Pressure=0 Pa Interface No slip Blood density=1050 kg/m3 Blood viscosity=0.0035 Pas BCs for the blood flow are not the exact ones in the literature. They use time varying inlet velocity and outlet pressure. I could not find any data besides graphs so if you have any excel data of these waveforms I would also appreciate if you can send to me. Is there any idea for this error about distortion unless my BCs are so inaccurate. I would appreciate your answers |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Star CCM Overset Mesh Error (Rotating Turbine) | thezack | Siemens | 7 | October 12, 2016 11:14 |
Total Mesh Displacement X not available in v12.0?? | haconk | CFX | 10 | March 9, 2011 05:58 |
fluent add additional zones for the mesh file | SSL | FLUENT | 2 | January 26, 2008 11:55 |
folded mesh in FSI | steve | CFX | 2 | May 24, 2007 07:33 |
How to control Minximum mesh space? | hung | FLUENT | 7 | April 18, 2005 09:38 |