|
[Sponsors] |
April 1, 2014, 14:29 |
CFX- Monte Carlo Radiation
|
#1 |
New Member
Orry Shamash
Join Date: Apr 2014
Posts: 4
Rep Power: 12 |
I am currently modeling a parabolic solar trough using ANSYS CFX 14.5 using the Monte Carlo model in oredr to utilize the directional radiation flux feature.
The directional radiation is defined using two points for axis definition and cylindrical components to concentrate the radiation to a focal line. The radiation needs to pass through the air (Air Ideal gas) domain and a solid quartz tube (absorption coefficient 0, refractive index of 1 and scattering coefficient of 0). the air and quartz tube are set to surface to surface and the working fluid (which i would like to absorb the radiation) is set to participating media. For some reason, The radiation is not heating up the working fluid as it passes through the trough. Does this have to do with the thermal radiation control in the advanced options of the Solver Control. Any help would be greatly appreciated!! |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Solver refuses to run: Monte Carlo Radiation Model | Zaphod'sSecondHead | CFX | 9 | February 14, 2017 09:20 |
Difference of result betn Fluent & CFX simulation for S2S radiation | njundale | Fluent UDF and Scheme Programming | 0 | November 6, 2012 00:35 |
combustion radiation and condensation in cfx | siden | CFX | 1 | February 3, 2011 17:39 |
Angle injection using Monte Carlo method | Asghari | Main CFD Forum | 0 | March 22, 2008 02:19 |
Info Radiation Monte Carlo Model | Matteo | CFX | 1 | December 22, 2006 09:01 |