|
[Sponsors] |
June 27, 2016, 20:06 |
Transient simulation time stepping
|
#1 |
Member
Ferruccio Rossi
Join Date: Jun 2016
Location: Melbourne, FL USA
Posts: 91
Rep Power: 9 |
Hi everyone,
I have a general idea of CFX time stepping which I got from different sources. I hope someone can clarify some of my doubts regarding the subject. 1. I know that Min Coeff. Loop and Max Coeff. Loop are the number of iterations for each time step. If I specify Max Coeff. Loop to be 5 (random example), what happens if the convergence criteria is not met within those 5 iterations? What is an ideal value for Min Coeff. Loop and Max Coeff. Loop? 2. What is a good way to define a correct total time and time step size? I generally use a total time between 5 and 10 seconds, with a time step size of 2.5E-2. My idea is that the best result is produced with a large total time and a small time step size. Is this correct? Thank you |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Unexpected deltaT decrease in pimpleFoam simulation | robyTKD | OpenFOAM Running, Solving & CFD | 9 | June 27, 2014 06:52 |
Question on transient simulation in OpenFOAM and FLUENT | nicklj | OpenFOAM Running, Solving & CFD | 4 | May 8, 2014 22:30 |
Unstabil Simulation with chtMultiRegionFoam | mbay101 | OpenFOAM Running, Solving & CFD | 13 | December 28, 2013 13:12 |
Transient simulation : Static temperature and time averaged static temperature | saisanthoshm88 | CFX | 4 | July 4, 2013 02:18 |
plot over time | fferroni | OpenFOAM Post-Processing | 7 | June 8, 2012 07:56 |