|
[Sponsors] |
Same results for different ambient temperature in ANSYS CFX |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
July 17, 2018, 04:58 |
Same results for different ambient temperature in ANSYS CFX
|
#1 |
New Member
Jinu Varghese
Join Date: Aug 2016
Posts: 8
Rep Power: 9 |
Hi all,
Please help me to resolve an issue that I got with the same results for two different conditions for CHT analysis in ANSYS CFX. Initailly, i did a CHT analysis in cfx with the ambient temperature as 105C. Then i repeated the analysis with the same setup with the ambient temperature as 20C, but i ended up getting the same temperature rise exactly the same as that of first one. My setup consists of a closed enclosure (top and bottom cover), inside it both the PCB and ICs are placed, inside air is also modeled. Cooling channel is provided on top cover, diesel at -6.11 c is flowing through it. Mass flow rate of diesel is 0.0019Kg/s (laminar flow) Outside temperature of top and bottom cover is set as ambient temperature. is this is the correct way to define the operating conditions? kindly help me resolving this. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FSI simulation in ansys cfx | Arash67.m | CFX | 1 | September 29, 2017 09:52 |
The ANSYS CFX solver exited with return code 1. No results file has been created. | kan8vicky@gmail.com | CFX | 4 | April 26, 2016 02:10 |
Can you help me with a problem in ansys static structural solver? | sourabh.porwal | Structural Mechanics | 0 | March 27, 2016 17:07 |
comparison with analytical results (1D)and(3D) CFX | Rogerio Fernandes Brito | FLUENT | 1 | December 2, 2012 06:12 |
Reading CFX-CFD results without Ansys CFX | JAY | ANSYS | 2 | July 7, 2009 16:48 |