|
[Sponsors] |
Calculating Loss Coefficient in 4-way Junctions |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
May 15, 2019, 06:04 |
Calculating Loss Coefficient in 4-way Junctions
|
#1 |
Senior Member
Sasan Ghomi
Join Date: Sep 2012
Location: Denmark
Posts: 292
Rep Power: 14 |
Dear friends,
One of the projects that I am dealing with is about the calculation of loss coefficients (DP/(0.5*rho*V^2)) in a 4-way junction. (three inlets and one outlet) Also, I have tried to compare my results with those mentioned in the following book; "Internal Flow Systems" , "Ds Miller" Unfortunately, there is a discrepancy in the results. (40% almost). In detail, in my simulation the magnitude of Yplus is under 100 and the drop pressure is calculated in the regions that the flow is developed totally. Moreover, the drop pressure that comes from friction is calculated according to Moody diagram and it is subtracted from the drop pressure in the junction. By the way, SST turbulence model is used and Reynolds number is around 1e5. Does anybody have any idea about this problem or know other references for the validation? Any hint is appreciated, Best Regards Sasan Ghomi |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
CFD by anderson, chp 10.... supersonic flow over flat plate | varunjain89 | Main CFD Forum | 18 | May 11, 2018 07:31 |
Loss Coefficient for Opening Boundary Condition | Liliane Maciel | CFX | 1 | February 18, 2018 02:05 |
Calculating Loss Coefficients for a porous media | CFX_Beginner | CFX | 2 | October 24, 2015 20:16 |
Question about heat transfer coefficient setting for CFX | Anna Tian | CFX | 1 | June 16, 2013 06:28 |
Automotive test case | vinz | OpenFOAM Running, Solving & CFD | 98 | October 27, 2008 08:43 |