|
[Sponsors] |
Periodic Rotational Boundaries with Pressure increase |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
|
February 19, 2020, 11:08 |
Periodic Rotational Boundaries with Pressure increase
|
#1 |
New Member
Dr. Flow Squad
Join Date: Mar 2009
Posts: 17
Rep Power: 17 |
I want to model a Periodic case where I only focus on half of the flow and utilized Rotational Boundaries from below to top. se picture. I want to set up a periodic boundary where I can vary the Pressure increase dp, so I am able to get the same velocities but with an increase in pressure. How is that done?
|
|
February 19, 2020, 14:49 |
|
#2 |
Senior Member
Join Date: Jun 2009
Posts: 1,865
Rep Power: 33 |
As far as I know, ANSYS CFX does not support pressure drop across rotational periodic interfaces.
I can only see, translational periodic interfaces with Pressure Change.
__________________
Note: I do not answer CFD questions by PM. CFD questions should be posted on the forum. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Pressure fields in FOAM, p field, total pressure, etc. | Tobi | OpenFOAM Post-Processing | 9 | March 25, 2022 02:33 |
periodic boundaries | Mary | FLUENT | 27 | January 6, 2021 02:54 |
CFX Solver stopped with error when requested for backup during solver running | Mfaizan | CFX | 40 | May 13, 2016 07:50 |
No flow through periodic (cyclic) boundaries in impeller with foam-extend-3.1 | anttiad9000 | OpenFOAM Running, Solving & CFD | 3 | March 2, 2016 20:37 |
Hydrostatic pressure in 2-phase flow modeling (long) | DS & HB | Main CFD Forum | 0 | January 8, 2000 16:00 |