|
[Sponsors] |
October 8, 2020, 22:11 |
Weird streamline in my simulation
|
#1 |
Member
William
Join Date: Jun 2020
Posts: 70
Rep Power: 5 |
Hello!
I'm trying to simulate the picture's structure. At inlet, two inlet are considered whose velocity is around 6 m/s. And the flow is go through the cuboid core structure. By using k-epsilon and SST turbulence model, I earned streamline. In k-e model, its residual comes down below even 1e-7, I thought it might be converged. But the streamline is so weird. Like picture 3, the streamline of the fluid is circulate at the center of inlet header. In my opinion, it should collide at center like ficture 1. I also used SST model, but its tendency was same. Monitoring residual status, like picture 2 and 4, its residual comes down first and bouncing up and comes down again. Before its bouncing, its streamline is collide at center, but after bouncing it becomes circulate. I don't know what's the problem with my simulation. I think it's not well fitted to real physics. Please anybody help me. Last edited by CFXer; October 19, 2020 at 23:03. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Some questions about flow boiling simulation in Fluent | beastieboys6 | FLUENT | 8 | November 20, 2017 23:47 |
very weird results 2d vs 3d simulation of airfoil | dennis722 | STAR-CCM+ | 8 | April 16, 2017 23:15 |
Weird result in simulation of Taylor-Couette Flow | amin.z | OpenFOAM Running, Solving & CFD | 6 | March 21, 2017 10:39 |
Simulation FPEs - turbulence for transient and steady-state? | DaveR | OpenFOAM Running, Solving & CFD | 5 | March 5, 2017 15:06 |
Huge file sizes when Running VOF simulation | aarratia | FLUENT | 0 | May 8, 2014 12:27 |