|
[Sponsors] |
November 21, 2008, 08:38 |
help on problem setup
|
#1 |
Guest
Posts: n/a
|
i am trying to simulate a problem as define by water having a high temperature is passing inside the pipe which is placed in air or any other fluid other than water. this other fluid is not stationary. Pipe having some thickness which can not be neglected. can any one help me. if i want to neglect the pipe thickness what i want to do for that so that air and water doesn't mixed.
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
setup vof test problem | Fang Jin | FLUENT | 1 | June 14, 2005 08:27 |
Dynamic Mesh setup problem | Jim | FLUENT | 1 | June 8, 2005 09:26 |
Problem Setup: Bi-Axial Rotation Possible? | Harmeet | CFX | 6 | February 11, 2005 15:27 |
CFD problem setup for flow through porous media | Paresh Jain | CFX | 5 | June 30, 2003 03:50 |
CFD problem Setup for Packed Bed Column | Vijay | CFX | 0 | June 20, 2003 08:23 |