|
[Sponsors] |
January 11, 2009, 17:32 |
Extruded 2D Mesh
|
#1 |
Guest
Posts: n/a
|
I'm using extruded 2d mesh in CFX. My volume (air) has totaly 2.1 mm thickness. In the middle, I have a 0.1 mm solid body. I splitted my volume to 3 part 1 mm -0.1 mm -1 mm (thicknesses) on z direction. I did it to have periodic pairs. Air is covering the solid and to use 2d extruded mesh ı have to have periodic pairs. But my problem is when ı finish the mesh, 0.1 mm solid is looking as it has 1 mm thickness and it is becoming apart from the air( I mean I'm having a meaningless blank in the volume). Can anyone explain me what can I do!? I need help...! ı can also use another methods in cfd which has the same effect.
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[ICEM] Negative volume error in hybrid mesh | siw | ANSYS Meshing & Geometry | 4 | September 3, 2014 05:25 |
[Gmsh] 2D Mesh Generation Tutorial for GMSH | aeroslacker | OpenFOAM Meshing & Mesh Conversion | 12 | January 19, 2012 03:52 |
modeling U-tube using 2D extruded mesh | afrit | CFX | 10 | April 6, 2011 11:49 |
[snappyHexMesh] external flow with snappyHexMesh | chelvistero | OpenFOAM Meshing & Mesh Conversion | 11 | January 15, 2010 19:43 |
2d irregular grid | Remy | Main CFD Forum | 1 | December 22, 2008 04:49 |