|
[Sponsors] |
March 31, 2011, 00:45 |
AIR or Water
|
#1 |
Member
HMR
Join Date: Jan 2011
Posts: 31
Rep Power: 15 |
Hi,
I planning to do simulation on ventilation and cooling systems. For my numerical simulation if I choose air as a working fluid which fluid should I use during experimental validation time(air or water)?Project proposal advice me to use air as a working fluid during CFD simulation but water should be used during experimental validation time, in here I am bit confuse, I prepare geometry and meshing on CFX as per experimental setup specification but in CFX pre if I choose air as working medium then air inlet velocity to the domain in simulation will be not same as water velocity in the experimental testing tank.How can I compare different parameter based on air data with same as from water data. Could anybody suggest me in this regards. Thanks in advance. HMR |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
mass flow in is not equal to mass flow out | saii | CFX | 12 | March 19, 2018 05:21 |
air bubble is disappear increasing time using vof | xujjun | CFX | 9 | June 9, 2009 07:59 |
Separation phenomenon of water, droplet and air | Raymond | CFX | 0 | July 9, 2004 22:59 |
Help!!!problems in air jet into water bath | kim | FLUENT | 4 | June 9, 2003 07:04 |
uptodate water distribution network | fredius,magige,tanzanian,(e.a) | Main CFD Forum | 0 | January 27, 2002 07:10 |