|
[Sponsors] |
March 31, 2011, 12:48 |
Imbalance in %, Y-axis scale correct?
|
#1 |
New Member
Dan
Join Date: Mar 2011
Posts: 10
Rep Power: 15 |
I am running a 3D simulation in CFX using k-omega SST.
I am monitoring the run and I plotted Energy, Mass and Momentum imbalance on the same monitor chart that residuals are plotted, this chart is logarithmic Y-axis. My question is, it says the H, U and P balances are being shown in %, if this true please confirm, because the simulation is at 1e-1 which is 0.1%, and this can easily be mistaken for 10% if it is not clear that the scale is showing actual percent values and not decimal values (for the three balance variables). Thank you |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Domain Imbalance | HMR | CFX | 5 | October 10, 2016 05:57 |
Turbulence length scale and integral length scale | rizhang | CFX | 2 | April 22, 2016 07:22 |
Moving mesh | Niklas Wikstrom (Wikstrom) | OpenFOAM Running, Solving & CFD | 122 | June 15, 2014 06:20 |
advection time scale | Tanveer ahmad Rubani | CFX | 1 | February 24, 2009 16:16 |
Relief Plots in CFX | Michael | CFX | 15 | June 30, 2006 08:01 |