|
[Sponsors] |
September 15, 2011, 08:59 |
Cavitation problem...
|
#1 |
Senior Member
Roland Rakos
Join Date: Mar 2009
Posts: 131
Rep Power: 17 |
Hello,
I would like to simulate the next phenomenon: There is a small cylinder which is loaded with water fully. (Cylinder is fully closed.) Volume of the cylinder starts to increase slowly until the start of the cavitation process. Finally the volume decreases back to the original value, the cavitation bubbles disappier, the water vapour turns into water and water phase will be in the full field again. In the simulation this process operates until the beginning of cavitation, water wapour develops in the field, but this phase does not turn into water after decreasing of the volume. Are there some ideas to solve this problem? Thanks in advance; Roland |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
convergence problem with FLUENT cavitation model | Belete Kiflie | FLUENT | 3 | February 20, 2006 10:16 |
cavitation problem | dhiman | FLUENT | 0 | February 2, 2006 10:58 |
Cavitation Simulation by CFD | Liu, L. | CFX | 2 | November 29, 2000 13:50 |
Cavitation Simulation by CFD | Liu, L. | Main CFD Forum | 7 | November 1, 2000 21:26 |
Is this problem well posed? | Thomas P. Abraham | Main CFD Forum | 5 | September 8, 1999 14:52 |