[user_of_cfx]

Hello,

Some time ago I asked a question about bunching trn results in CFX-Post. This is my original post:

Hello,

I ran a transient simulation that went on for about 1000 timesteps. Unfortunately the simulation timed out (I ran it on a cluster) about 300 timesteps before the end without a .res file but with the .trn files for each timestep up to that point saved as usual.

I decided to rerun the simulation starting from the last _full.trn file and collected the rest of the .trn files.

The question is, can I put the .trn files of the first part of the simulation in the folder of the second part and post process all the timesteps in one go? I need to extract time-averaged values so I need all the timesteps bunched in the same folder for my results.

I tried just copying the first-part trn files into the folder, but CFX Post will only read the second-part timesteps.

Any help that will save me from re-running the whole thing will be greatly appreciated.

Cheers,
Christa

Even though I received great help on the subject for CFX-Post (thanks!), I have the same problem with Ensight, and I was wondering if there is a way to do the bunching. I need to construct a video and it would be great if I could create the video for the full cycle, and not just for the timesteps that were saved in the latest simulation result folder.

Many thanks again.

Best wishes,
Christa