|
[Sponsors] |
How to set physical model to simulate HPDC multi-cavities in Flow 3-D. |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
February 20, 2013, 12:16 |
How to set physical model to simulate HPDC multi-cavities in Flow 3-D.
|
#1 |
New Member
Rajasthan
Join Date: Dec 2012
Posts: 1
Rep Power: 0 |
Please someone help me to set physical model and boundary conditions for multi-cavity diecasting metal filling and solidification simulation in Flow 3-D V9.3.
thanks |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Geometry basics. How do i model an open domain to simulate a jet flow | canev.civelek | ANSYS | 7 | March 12, 2012 05:26 |
Easy question: how to simulate water flow? | Freeman | FLUENT | 6 | March 4, 2009 02:31 |
OpenFOAM 13 Intel quadcore parallel results | msrinath80 | OpenFOAM Running, Solving & CFD | 13 | February 5, 2008 05:26 |
physical model with cfd | Beno | Main CFD Forum | 0 | August 30, 2004 06:06 |
Unsteady 3d flow and k-eps model | J Roued | Main CFD Forum | 13 | August 31, 1999 13:32 |