|
[Sponsors] |
Time step for Low pressure turbine simulation |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
March 23, 2013, 11:23 |
Time step for Low pressure turbine simulation
|
#1 |
Super Moderator
|
Hello every one,
I am solving flow on low pressure turbine profile T106A using pressure based coupled solver. I saw a paper (J of Turbomachinery) on the same profile where author had used finitie difference LES (Explicit solver) code to solve the flow. Here he had enforced CFL <=0.2. Now I would like to ask should I enforce same CFL condition in my simulation which is Implicit solver. Presently time steps I am studying are 0.001, 0.0001 and 0.00001 which are giving me maximum cell cournt number 100, 17 and 1.3 respectively. My questions are: 1. What time step I should take? Which parameter I should observe? 2. How much time I should run simulation? 3. What should be convergence criteria for each time step? Currently I have set it as 0.05 in relative convergence criteria. More details in next post. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Extrusion with OpenFoam problem No. Iterations 0 | Lord Kelvin | OpenFOAM Running, Solving & CFD | 8 | March 28, 2016 11:08 |
same geometry,structured and unstructured mesh,different behaviour. | sharonyue | OpenFOAM Running, Solving & CFD | 13 | January 2, 2013 22:40 |
Time step for wind turbine analysis | amoolraina | FLUENT | 4 | March 25, 2011 02:58 |
calculation diverge after continue to run | zhajingjing | OpenFOAM | 0 | April 28, 2010 04:35 |
what the result is negatif pressure at inlet | chong chee nan | FLUENT | 0 | December 29, 2001 05:13 |