|
[Sponsors] |
July 8, 2013, 02:05 |
assign transient random data to inlet face
|
#1 |
Member
^^
Join Date: Aug 2011
Posts: 70
Rep Power: 14 |
Dear All.
Could you tell me how to import/assign time series of velocity at each node (y-z plane) of inlet face? My transient velocity data is random data so It can't be defined as a profile or function. the velocity is random value in a certain range. I would like to import/assign time series of random data to each node of inlet face in Fluent or CFX. For example, the inlet face has 5 by 5 nodes (vertically 5, lateral 5) and the length of time series is 2,000 (time step =0.05, total time : 10sec). in other words, each node has velocity with 2000 data length. In this case, what am I going to do? Many thanks for your comments on this problem. Last edited by colopolo; July 8, 2013 at 19:45. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Create an internal face | aylalisa | OpenFOAM Pre-Processing | 1 | June 19, 2013 12:02 |
[Commercial meshers] fluentMeshToFoam multidomain mesh conversion problem | Attesz | OpenFOAM Meshing & Mesh Conversion | 12 | May 2, 2013 10:52 |
Inlet profile from 2D velocity and turbulence data | Attesz | OpenFOAM Pre-Processing | 2 | March 11, 2012 06:09 |
Map external data (heat flux in) on solid face | jerry1977 | CFX | 2 | January 31, 2012 13:32 |
Transient Inlet boundary condition - fully develop | Omer | CFX | 3 | November 28, 2006 16:22 |