2D laminar fluid simulation with leak

kristaps okorie · July 30, 2015, 07:26

hi guys
i am simulating a 2D laminar in a pipe with leak, but encounter problem with the boundary condition for the leak.wish to know how to go about it. thanks for responding in advance

kristaps okorie · July 30, 2015, 16:03

thanks for responding, but still want to ask if the mesh sizing of leak would be the same as the main outlet?

kristaps okorie · August 1, 2015, 03:56

thanks it was really helpful, but my leak is some where in the middle of the pipe length, and don't really know if its right to have 2 different wall (wall 1 and wall2 ) for the boundary of the wall before the leak and after the leak? thanks

kristaps okorie · August 2, 2015, 16:56

mesh.pdf this the mesh . the more dense area is the leak .thanks

kristaps okorie · August 2, 2015, 17:05

geo.pdf this is also the geometry the pipe.thanks

July 30, 2015, 07:26	2D laminar fluid simulation with leak	#1
kristaps okorie New Member christopher okorie Join Date: Jul 2015 Posts: 7 Rep Power: 10	hi guys i am simulating a 2D laminar in a pipe with leak, but encounter problem with the boundary condition for the leak.wish to know how to go about it. thanks for responding in advance

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Multiphase simulation of bubble rising	Niru	CFX	5	November 25, 2014 13:57
Overflow Error in Multiphase Modelling with Two Continuous Fluids	ashtonJ	CFX	6	August 11, 2014 14:32
Need advice for compressible fluid simulation	houkensjtu	OpenFOAM Running, Solving & CFD	0	February 2, 2014 07:15
Weird oscillations in simulation of 3D laminar flow in a square duct	jpanchog	Main CFD Forum	1	November 8, 2013 14:13
How to determinate turbulence scale in LES (laminar simulation)?	Franciswu21	ANSYS	0	October 22, 2009 12:48

July 30, 2015, 16:03		#2
kristaps okorie New Member christopher okorie Join Date: Jul 2015 Posts: 7 Rep Power: 10	thanks for responding, but still want to ask if the mesh sizing of leak would be the same as the main outlet?

August 1, 2015, 03:56		#3
kristaps okorie New Member christopher okorie Join Date: Jul 2015 Posts: 7 Rep Power: 10	thanks it was really helpful, but my leak is some where in the middle of the pipe length, and don't really know if its right to have 2 different wall (wall 1 and wall2 ) for the boundary of the wall before the leak and after the leak? thanks

August 2, 2015, 16:56		#4
kristaps okorie New Member christopher okorie Join Date: Jul 2015 Posts: 7 Rep Power: 10	mesh.pdf this the mesh . the more dense area is the leak .thanks

August 2, 2015, 17:05		#5
kristaps okorie New Member christopher okorie Join Date: Jul 2015 Posts: 7 Rep Power: 10	geo.pdf this is also the geometry the pipe.thanks