|
[Sponsors] |
Donut Control Volume: Radial Velocity Profile Extraction |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
February 5, 2016, 04:32 |
Donut Control Volume: Radial Velocity Profile Extraction
|
#1 |
New Member
Join Date: Jan 2016
Posts: 8
Rep Power: 10 |
Dear CFD experts, please help me in obtaining the radial velocity profile for the control volume shown below.
The fluid flow is from the outer radius to the inner radius of the donut. One wall (volute wall) is stationary while the other is an impeller wall rotating at 2000RPM. The plot below shows what I should see from CFD results according to analytical results. The max velocity is skewed towards the stationary wall. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
VOF Volume fraction in Velocity inlet | aruelle | FLUENT | 2 | May 10, 2024 10:17 |
how to set periodic boundary conditions | Ganesh | FLUENT | 15 | November 18, 2020 06:09 |
channelFoam for a 3D pipe | AlmostSurelyRob | OpenFOAM | 3 | June 24, 2011 13:06 |
fluent add additional zones for the mesh file | SSL | FLUENT | 2 | January 26, 2008 11:55 |
Terrible Mistake In Fluid Dynamics History | Abhi | Main CFD Forum | 12 | July 8, 2002 09:11 |