|
[Sponsors] |
March 19, 2016, 09:32 |
Turbulence Intensity
|
#1 |
New Member
Niels Hawinkel
Join Date: Mar 2016
Posts: 6
Rep Power: 10 |
I'm trying to model the drag coefficient on a car.
When i set the Turbulence Intensity to 15% at the inlet and outlet backflow and plot the result, I can see that the turbulence intensity immediatly drops to basically 0% right after the inlet (so it has no influence). The turbulence viscosity ratio is 10 and I use a uniform velocity profile (25m/s horizontal at inlet). How do I solve this? |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Turbulence Intensity at inlet boudary | egge24 | FLUENT | 1 | October 10, 2015 15:56 |
Turbulence intensity - cross wind on a body | Fabio88 | Main CFD Forum | 0 | May 4, 2015 03:44 |
How to define the turbulence intensity and mixing length at an outlet (for k-eps)? | david39 | OpenFOAM Running, Solving & CFD | 6 | February 2, 2011 03:01 |
High turbulence intensity | wenfengxie | FLUENT | 1 | April 16, 2010 12:00 |
High Turbulence Intensity Problem | bwg | FLUENT | 1 | January 13, 2010 13:09 |