|
[Sponsors] |
example of pressure-outlet boundary condition |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
December 14, 2016, 14:02 |
example of pressure-outlet boundary condition
|
#1 |
Senior Member
Onur Özcan
Join Date: Feb 2016
Location: Istanbul/Turkey
Posts: 461
Rep Power: 12 |
hi all,
I have uploaded some screenshots. First one is total model and it has a lots of holes on it. Second one cylindrical is fluid cell zone. Fluid domain creating in each holes are to extended some more Last one is pressure outlet bc. As you can see it is not hole diameter due to model shape. That is why pressure outlet volume flow rate in surface monitor always is fluctuating. Any thoughts? Maybe face applied in pressure outlet should be changed? or something like that ? |
|
December 14, 2016, 14:03 |
example of pressure outlet bc
|
#2 |
Senior Member
Onur Özcan
Join Date: Feb 2016
Location: Istanbul/Turkey
Posts: 461
Rep Power: 12 |
Screenshots are attached.
|
|
December 14, 2016, 14:06 |
|
#3 |
Senior Member
Onur Özcan
Join Date: Feb 2016
Location: Istanbul/Turkey
Posts: 461
Rep Power: 12 |
Residuals and volumetric flow rate in pressure outlet bc are attached.
|
|
December 16, 2016, 01:41 |
|
#4 |
Senior Member
Onur Özcan
Join Date: Feb 2016
Location: Istanbul/Turkey
Posts: 461
Rep Power: 12 |
problem solved!
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Issues on the simulation of high-speed compressible flow within turbomachinery | dowlee | OpenFOAM Running, Solving & CFD | 11 | August 6, 2021 07:40 |
Pressure Outlet Boundary Condition | Ahmed_Ali | FLUENT | 0 | March 16, 2016 04:17 |
Static pressure boundary condition at outlet | jennz | CFX | 4 | February 11, 2014 04:29 |
Question about heat transfer coefficient setting for CFX | Anna Tian | CFX | 1 | June 16, 2013 07:28 |
RPM in Wind Turbine | Pankaj | CFX | 9 | November 23, 2009 05:05 |