Coating On the inner tube of counter flow heat exchanger -- CFD Online Discussion Forums

November 22, 2017, 03:57	Coating On the inner tube of counter flow heat exchanger	#1
Achyut New Member Achyut Join Date: Nov 2017 Posts: 1 Rep Power: 0	I have a counter flow heat exchanger model with both outer and inner pipe as copper. The inner copper tube has a 1mm thick coating of tungsten carbide. Although I gave the coating there is not much change in the temperature difference between the hot fluid in the inlet and outlet. The cold and hot inlet temperature is given by the user and the results are hot and cold outlet temperature. Uncoated Heat Exchanger Cold in: 275K Cold out: 308.34K Hot in: 375K hot out: 344.5K Heat exchanger with inner tube coated Cold in: 275K Cold out: 308.14K Hot in: 375K hot out: 344.23K What can be the possible cause?

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Solidwork flow floefd - modeling heat exchanger in a system	mzreik	FloEFD, FloWorks & FloTHERM	3	January 8, 2016 11:30
How to carry out 3D shell and Tube Heat Exchanger analysis in fluent	medogalal	FLUENT	3	December 30, 2015 04:28
heat transfer simulation of 3D laminar flow in uniformly heated tube	engrmansoor2534	FLUENT	0	May 7, 2015 06:23
Modeling air flow through a heat exchanger	dvanb	STAR-CCM+	1	May 15, 2014 20:54
shell and tube heat exchanger	samidabest	FLUENT	0	January 8, 2013 03:26

All times are GMT -4. The time now is 21:22.