[oozcan]

Hello guys,

I need to give an input in the porous jump BC.

How can I give as input "face permeability and pressure porous jump"?

This is the 3d model and air flows through some faces of whole rectangular faces. Remains are wall

Really appreciated!

[oozcan]

do you have any formula for setting this boundary condition?

[AlexanderZ]

Take a look into Ansys Fluent User's Guide
you may find information related to your question there

Best regards

[LuckyTran]

Are you asking how or what? How... you just type in the values.


If you ask what.... Why do you use a porous jump bc if you don't know what these parameters are? Do you have any idea what happen?

[oozcan]

Originally Posted by LuckyTran

Are you asking how or what? How... you just type in the values.


If you ask what.... Why do you use a porous jump bc if you don't know what these parameters are? Do you have any idea what happen?

OK,well, attached is to show you what exactly I am working on,

Face (area) has a half of wall boundary.but I choiced to define it only as porous jump boundary condition to minimize complexity of the boundary conditions and mesh cells. Anyway, porous jump boundary conditions ask some inputs and could not find any tutorials and some manuals. So all dimensions are be showed in the attached one. So, what formulas are needed for those inputs?

Best Regards,