|
[Sponsors] |
June 30, 2019, 15:39 |
[ANSYS Fluent] Floating Point Error
|
#1 |
New Member
Georg
Join Date: Jun 2019
Posts: 3
Rep Power: 6 |
Hello Fluent Forus,
I'm currently preparing my MSc Thesis on 'CFD Simulation of Submerged Water Jet Impinging on a Mobile Bed' but before that simulation I need to consider a simpler case of a submerged circular free jet (2D) and graph its velocity vs distance from the nozzle. I'm currently stuck on this simulation because the axissymetric simulation is giving me the program is telling me there is a 'Floating Point Error' (this does not happen when I consider the planar case). I've checked the meshing (element size = 0.005m) and the boundary conditions (velocity inlet, pressure outlet, wall, and symmetry) and it doesn't look like there is a problem. Inlet Velocity: 5 m/s (Reynolds ~150,000 Turbulence Intensity: 3.6 % Turbulence Model: k-epsilon Standard Thank you for your time and help. |
|
July 3, 2019, 03:14 |
|
#2 |
Member
Join Date: Mar 2009
Location: Vietnam
Posts: 36
Rep Power: 18 |
Hi,
In Fluent, a 2D-axisymmetric calculation needs a geometry on the XY plane, with the axis on X-axis and showing positive Y-values. With your axisymmetric simulation, I think that you don't remember to change type of BC at symmety boundary: "symmetry" to "axis". |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
UDF for DPM particle deposition modelingpa | haghshenasfard | Fluent UDF and Scheme Programming | 10 | September 15, 2019 02:03 |
Compile calcMassFlowC | aurore | OpenFOAM Programming & Development | 13 | March 23, 2018 07:43 |
[OpenFOAM] Native ParaView Reader Bugs | tj22 | ParaView | 270 | January 4, 2016 11:39 |
Errors in UDF | shashank312 | Fluent UDF and Scheme Programming | 6 | May 30, 2013 20:30 |
Installation OF1.5-dev | ttdtud | OpenFOAM Installation | 46 | May 5, 2009 02:32 |