|
[Sponsors] |
|
December 24, 2019, 06:10 |
FSI 2 way simulation issues
|
#1 |
New Member
Join Date: Nov 2015
Posts: 7
Rep Power: 10 |
I have a favor to ask pls! I have some problems with solving a FSI 2 way issue.
The problem is that i need to simulate a gear motor. I have setup the system coupling for this math but it seem it doesnt work. - When the fluid contact the first gear from inlet which is set a number of pressure magnitude, it will create a force leading to turing the gear and the next step is applying the displacement of the gear back to the fluent module and re-meshing. - All things that i have done is setting transient structure including putting fluid interface for several surfaces, frictionless support for the shaft. Besides, im using transient solver in fluent module with k-epsilon model. - In the dynamic mesh tab, i change fluid domain to deforming and the interfaces contacted with the gear is system coupling. Am i right when using this method to solve the problem? Is there any problems with this setup or did i miss something? Appreciated so much. And here is my attachment: motor.jpg |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Unexpected CFX_SOLVER license error in ANSYS-CFX FSI Simulation | PranjalNewton | CFX | 10 | April 13, 2018 11:43 |
Wing FSI simulation: Shell elements or 3D solid body? | frossi | CFX | 3 | June 15, 2016 21:02 |
FSI Simulation of a 2D airfoil | marcanyada | CFX | 13 | July 3, 2014 10:23 |
2 way FSI simulation errors | ninjabro | CFX | 1 | September 8, 2011 09:23 |
Connectivity issues in FSI I think | heinx055 | ANSYS | 0 | July 25, 2011 13:08 |