[zog]

I performed a DPM simulation in which I started to record the particles taht are trapped in a wall : report, sample, select the injection and the wall. It works wonders and I have now a huge file:

(wall_face 1)
(          x           y            z            u            v            w     diameter            t  parcel-mass         mass  n-in-parcel         time    flow-time)
((-1.3673e-02   8.8513e-02   9.3209e-02   3.1344e-02  -5.3337e-02   1.3182e-01   1.4242e-07   3.0000e+02   1.5127e-18   1.5127e-18   1.0000e+00   1.7250e-01   3.5416e-01) in0:105734)
((-1.3481e-02   8.8216e-02   9.2435e-02  -2.8814e-01   4.6485e-02  -4.1038e-01   2.4667e-07   3.0000e+02   7.8583e-18   7.8583e-18   1.0000e+00   1.8362e-01   3.5437e-01) in0:49977)
(.....)

Only thing is... I can't seem to either plot it in Fluent to then export (if i try to use it as input for injection it says 0 particles...) or to simply import it in CFDpost to plot it alongside the usual particles track.


I can use gnuplot or such to display it but I need to do the final postprocessing in CFDpost...



Any solution ? I tried to look for the required format to import raw x,y,z,data datafiles in cfd-post but... it doesn't seem to be any help on this on their manual.