CFDpost exporting value

HuseyinCan · May 7, 2020, 15:14

Hello guys i have done a simulation but i have some problem in cfd post i want to get torque values wrt time steps.However only i can get is torque value for one times step how can i get this data

vinerm · May 8, 2020, 05:35

To do that, first you need to ensure that all the time data is available if you go to Time Selector in CFDPost. Then, define an expression, which could just be Torque()@location and Insert a Chart. Select Transient option under the chart and select the expression; you can directly type the expression here as well. It will plot a chart of torque vs. time. Then, you can click on Export within the Chart to export it as an external text file, if you want.

HuseyinCan · May 8, 2020, 11:13

Thank you for your reply Vinerm it worked

May 7, 2020, 15:14	CFDpost exporting value	#1
HuseyinCan New Member Hüseyin Can Sülük Join Date: Apr 2020 Posts: 21 Rep Power: 6	Hello guys i have done a simulation but i have some problem in cfd post i want to get torque values wrt time steps.However only i can get is torque value for one times step how can i get this data

May 8, 2020, 05:35	Torque	#2
vinerm Senior Member Vinerm Join Date: Jun 2009 Location: Nederland Posts: 2,946 Blog Entries: 1 Rep Power: 35	To do that, first you need to ensure that all the time data is available if you go to Time Selector in CFDPost. Then, define an expression, which could just be Torque()@location and Insert a Chart. Select Transient option under the chart and select the expression; you can directly type the expression here as well. It will plot a chart of torque vs. time. Then, you can click on Export within the Chart to export it as an external text file, if you want. HuseyinCan and Yagu94 like this. __________________ Regards, Vinerm PM to be used if and only if you do not want something to be shared publicly. PM is considered to be of the least priority.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LES data exporting & post-processing	sskp	STAR-CCM+	2	April 16, 2020 04:30
Issue exporting su2 format from gmsh	Gaetano03	SU2	6	September 21, 2018 11:18
exporting data from Fluent in batch mode without exporting entire design point	nnvoro	FLUENT	5	May 6, 2013 01:51
Exporting Outlet Conditions to Inlet	viggi90	CFX	9	March 21, 2012 16:50
Star-CD4 can not read the boundaries exporting by an old version	hamoudi	CFX	0	May 26, 2009 12:35

May 8, 2020, 11:13		#3
HuseyinCan New Member Hüseyin Can Sülük Join Date: Apr 2020 Posts: 21 Rep Power: 6	Thank you for your reply Vinerm it worked