Fluent Scale problem

Seyed Saeid Nabavi · October 30, 2020, 01:21

Hi dears
I was attempting to simulate symmetry fluid domain in fluent but when I checked General/Scale Mesh, I understood that "Ymin" has amount of -3e-15 instead of zero, so I revised my geometry constraint, but it has still the same problem.
I request you to help me.

MKuhn · November 2, 2020, 08:51

-3e-15 is almost zero. These difference should be negligible, or what is your overall dimension?

Seyed Saeid Nabavi · November 2, 2020, 09:36

Quote:

Originally Posted by MKuhn

-3e-15 is almost zero. These difference should be negligible, or what is your overall dimension?

Hi
x=-1.5 to 18
y=0 to 10
z=0 to 15

Seyed Saeid Nabavi · November 2, 2020, 09:38

Quote:

Originally Posted by MKuhn

-3e-15 is almost zero. These difference should be negligible, or what is your overall dimension?

I found it out. I should translate the mesh with mesh translate box.

October 30, 2020, 01:21	Fluent Scale problem	#1
Seyed Saeid Nabavi New Member Join Date: Jul 2020 Posts: 7 Rep Power: 6	Hi dears I was attempting to simulate symmetry fluid domain in fluent but when I checked General/Scale Mesh, I understood that "Ymin" has amount of -3e-15 instead of zero, so I revised my geometry constraint, but it has still the same problem. I request you to help me.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stefan problem using fluent	Isaacibp1401	Fluent Multiphase	2	June 7, 2021 06:49
Fluent - license problem.	Marcin	FLUENT	3	April 13, 2018 17:33
Problem with Volumetric Reactions in Fluent	Kashif Rashid	Fluent UDF and Scheme Programming	2	December 28, 2017 01:36
fluent parallel problem in win7 x64 system	dunga82	FLUENT	8	April 19, 2012 21:23
fluent convergence problem	josip76	FLUENT	0	May 26, 2011 21:08

November 2, 2020, 08:51		#2
MKuhn Senior Member Moritz Kuhn Join Date: Apr 2010 Location: Germany, Dresden Posts: 217 Rep Power: 17	-3e-15 is almost zero. These difference should be negligible, or what is your overall dimension?