|
[Sponsors] |
Eddy dissipation model temperature profile problem |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
November 18, 2020, 04:05 |
Eddy dissipation model temperature profile problem
|
#1 |
New Member
Ozan KEKÜL
Join Date: Nov 2020
Posts: 8
Rep Power: 5 |
Hello ,
I'm trying to model NH3-oxy combustion through eddy dissipation model but i m getting too high temperature values. I use one step reaction as NH3+0,75O2 = 0,5N2 + 1,5H2O. I shared the details of my model as follows; 1. Equivalence ratio : 0,83 2. Thermal power: 10 kw 3. Viscous model: k-epsilon 4. Eddy dissipation model 5. mixture materials has been taken from fluent database for nh3 and other species. (i dont know exactly which properties can i change on mixture material to decrease temperature values) 6. Reactions dialog box: rate exponents both for nh3 and o2 are 1 , for products are zero. Mixing rate values A : 4, B: 0.5 ( i have changed the A value from 4 to 1 but no avail) 7. radiation model is P1. Consequently, what should i do to get plausible temperature values for nh3-oxy combustion. your suggestion will be very helpful . Thanks in advance. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Problem in modified pisoFoam with temperature equation + thermophysical model | Matt_B | OpenFOAM Programming & Development | 17 | November 7, 2019 09:23 |
problem with convergence in combustion model ? | sooraj546 | FLUENT | 0 | September 14, 2019 10:20 |
Eddy dissipation model combustion flame temp much higher than theoritical | shaman | CFX | 5 | October 20, 2016 20:52 |
Wrong flow in ratating domain problem | Sanyo | CFX | 17 | August 15, 2015 06:20 |
temperature too high in eddy dissipation | Peter Lemtis | FLUENT | 3 | November 24, 2002 00:45 |