CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Segmentation fault using non-conformgrid interface

Register Blogs Community New Posts Updated Threads Search

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old   June 13, 2005, 18:49
Default Segmentation fault using non-conformgrid interface
  #1
Anindya
Guest
 
Posts: n/a
I try to join 2 nonconformal interfaces using tmerge. I open up the merged case file in fluent and set the grid interface. As such 2 walls (boundary zones) are created (say wall-4 and wall-5). I change the boundary condition of one of the walls (wall-5) to say pressure. But the following error message shows up when I try to run it. The only time when Fluent runs ok is when I keep both of them as walls. Could someone please let me know what the problem might be. This happens with 6.2 but never happened with 6.1 version of fluent.

Thanks for your help. Anindya

iter continuity x-velocity y-velocity z-velocity k epsilon time/iter

reversed flow in 115 faces on pressure-inlet 5.

================================================== ============================ Stack backtrace generated for process id 4570 on signal 1 : /usr/local/Fluent.Inc/fluent6.2.16/lnx86/3d/fluent.6.2.16[0x863cbff] Please include this information with any bug report you file on this issue! ================================================== ============================

/usr/local/Fluent.Inc/fluent6.2.16/lnx86/3d/fluent.6.2.16[0x863ca92] /lib/i686/libpthread.so.0[0x94a097] /lib/i686/libc.so.6[0xc5f898] /usr/local/Fluent.Inc/fluent6.2.16/lnx86/3d/fluent.6.2.16(Flow_Iterate+0x298)[0x814a5f8] /usr/local/Fluent.Inc/fluent6.2.16/lnx86/3d/fluent.6.2.16[0x81804c6] /usr/local/Fluent.Inc/fluent6.2.16/lnx86/3d/fluent.6.2.16(eval+0xb6f)[0x86694b6] /usr/local/Fluent.Inc/fluent6.2.16/lnx86/3d/fluent.6.2.16(eval+0xb6f)[0x86694b6] /usr/local/Fluent.Inc/fluent6.2.16/lnx86/3d/fluent.6.2.16(eval+0xd4a)[0x8669691] /usr/local/Fluent.Inc/fluent6.2.16/lnx86/3d/fluent.6.2.16(eval+0xf0b)[0x8669852] /usr/local/Fluent.Inc/fluent6.2.16/lnx86/3d/fluent.6.2.16[0x8669aca] /usr/local/Fluent.Inc/fluent6.2.16/lnx86/3d/fluent.6.2.16(eval_errprotect+0x41)[0x8669b7b] /usr/local/Fluent.Inc/fluent6.2.16/lnx86/3d/fluent.6.2.16(eval+0xb6f)[0x86694b6] /usr/local/Fluent.Inc/fluent6.2.16/lnx86/3d/fluent.6.2.16(eval+0x2f3)[0x8668c3a] /usr/local/Fluent.Inc/fluent6.2.16/lnx86/3d/fluent.6.2.16(eval+0x102a)[0x8669971] /usr/local/Fluent.Inc/fluent6.2.16/lnx86/3d/fluent.6.2.16(eval+0xf0b)[0x8669852]

Error: fluent.6.2.16 received a fatal signal (SEGMENTATION VIOLATION). Error Object: #f
  Reply With Quote

 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wind turbine simulation Saturn CFX 58 July 3, 2020 01:13
Segmentation fault when running dieselFoam or dieselEngineFoam in parallel francesco OpenFOAM Bugs 4 May 2, 2017 21:59
ParaView segmentation fault only for multiphase gwierink OpenFOAM 9 March 25, 2010 07:23
RPM in Wind Turbine Pankaj CFX 9 November 23, 2009 04:05
Replace periodic by inlet-outlet pair lego CFX 3 November 5, 2002 20:09


All times are GMT -4. The time now is 11:27.