|
[Sponsors] |
August 7, 2006, 18:53 |
Total Heat Flux Calculated by FLUENT
|
#1 |
Guest
Posts: n/a
|
Users,
wanted: how to access the total heat flux, as calculated by FLUENT, from within a UDF. context: I have a very simple rectangular (2d) enclosure- 4 walls. I've imposed constant temperatures to three of the sides and a linearly varying temperature along the 4th wall. I'm using the S2S radiation model, and this problem is radiation only- no flow. The walls are of "0" thickness and the enclosure is just air. I want the total heat flux at each cell/face, of the wall across from the one with varying temperature. I know Fluent can calculate the heat flux (you can plot it! or use "Wall Fluxes"), but I don't know how to get to it from within my UDF - is there a way to read it in or calculate it? Another way of calculating it using other vari ables determined by FLUENT? Thank you! |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wall Heat Flux & Temperature | Greg Perkins | FLUENT | 10 | November 20, 2015 09:32 |
Change Equation Total heat flux ? | boku | FLUENT | 0 | November 24, 2010 03:00 |
HTC/Wall Heat Flux monitoring in 12.1 | Michael.J | CFX | 4 | June 10, 2010 08:36 |
Inconsistent Total Heat Transfer Rate | Ken Adams | FLUENT | 0 | July 24, 2007 11:04 |
solar heat flux through roof | Tim | FLUENT | 1 | January 17, 2007 16:01 |