|
[Sponsors] |
How to solve 2 diferrent specify continuum types |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
October 17, 2006, 09:37 |
How to solve 2 diferrent specify continuum types
|
#1 |
Guest
Posts: n/a
|
Hi all,
Any suggestion is much appreciated! Basically, I am modelling a solid model (with heat generation) and also the surrounding air around it. My purpose is to see: 1. the thermal distribution of the solid, 2. the temperature of the fluid and also 3. the fluid flow pattern (if i assign a certain velocity inlet to the fluid). Therefore i would have 2 continuum zone which is specified during my session in gambit 2.2.30. 2Zones: 1. my solid - solid 2. surrounding air - fluid For the wall boundary between the 2 zones, i use "face --> connect face" to combine the 2 faces into 1 for each coupling faces. For example, a face from the solid is combine with another similar face from the fluid. The face is then defined as internal boundary. However, when i proceed to Fluent 6.2.16, the error as below appear: __________________________________________________ _________ Warning: materials in neighbor cell threads (2 and 3) of interior zone 4 are of different types (aluminum and air). This problem MUST be fixed before solving! Warning: materials in neighbor cell threads (2 and 3) of interior zone 4 are of different types (aluminum and air). This problem MUST be fixed before solving! __________________________________________________ _________ I am stucked. Please help me! Thousand thanks for spending your time in helping my problem and replying! Tuw University of Malaya Malaysia tuwtzekhai8@yahoo.com |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Linearized NS euqations: how to solve them?(problem with Matrix operations..) | matteoL | OpenFOAM Running, Solving & CFD | 0 | November 18, 2009 06:58 |
Continuum boundary types for particle tracking | Prashanth | FLUENT | 1 | November 19, 2008 07:43 |
doubt on specifying continuum types | raghav | FLUENT | 2 | October 21, 2008 23:46 |
How to solve another continuum and momentum eqn? | west_wing | FLUENT | 0 | August 25, 2003 10:00 |
setting boundary and continuum in GAMBIT | Hakeem | FLUENT | 0 | August 14, 2000 15:32 |