|
[Sponsors] |
Fluent dynamic mesh 'remeshing' method for pyramid elements |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
March 9, 2010, 02:48 |
Fluent dynamic mesh 'remeshing' method for pyramid elements
|
#1 |
Member
Join Date: Sep 2009
Posts: 69
Rep Power: 16 |
Hi everyone
I am working on a hybrid structured/unstructured mesh simulation at the moment with pyramid elements at the interface of both the meshs. My problem is the structured part of the mesh is moving dynamically as a solid body and it is causing the pyramid elements of the unstructured mesh to collapse. I am using both smoothing and remeshing methods. I am only able to preview it up to a certain point and then negative volume was detected. And when I tagged the negative volume for checking, it is always a pyramid element. Is it true that Fluent Dynamic Mesh does not remesh pyramid elements? If so how can I go about it as a pyramid element is the only element that can connect a hexahedral and tri/tetra region together. I am simulating a pitching airfoil by the way and the structured mesh is the boundary layer mesh while the unstructured is the farfield. Thanks for your help Regards, Darren |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Gambit problems | Althea | FLUENT | 22 | January 4, 2017 03:19 |
Moving mesh | Niklas Wikstrom (Wikstrom) | OpenFOAM Running, Solving & CFD | 122 | June 15, 2014 06:20 |
Dynamic moving mesh | Pei-Ying Hsieh (Hsieh) | OpenFOAM Running, Solving & CFD | 64 | June 7, 2012 10:04 |
why dynamic mesh method give wrong results? | weiyang1980 | Main CFD Forum | 0 | September 22, 2009 21:06 |
fluent add additional zones for the mesh file | SSL | FLUENT | 2 | January 26, 2008 11:55 |