[caohan]

Hi all,Note: Separating wall zone 11 into zones 11 and 1.
When I import the mesh to fluent, it always say

wall_bottom -> wall_bottom (11) and wall_bottom:001 (1)
Note: Separating wall zone 12 into zones 12 and 15.
wall_top -> wall_top (12) and wall_top:015 (15)
Note: Separating interior zone 16 into zones 16 and 17.
default-interior -> default-interior (16) and default-interior:017 (17)
Note: Separating interior zone 16 into zones 16 and 18.
default-interior -> default-interior (16) and default-interior:018 (18)


periodic_3
Skipping thread 8 of domain 3_shadow (not referenced by grid).
periodic_2
Skipping thread 6 of domain 2_shadow (not referenced by grid).
periodic_1
Skipping thread 4 of domain 1_shadow (not referenced by grid).
fluid.10

does somebody can help me to explain what is problem and how can I solve it, here is my model, it is a single wind turbine model, I use the conical shaped to be my compuataional domain, I set 3 periodic boundary condtions, one velocity inlet and pressure outlet, what's more, I set the top and the bottom of the concial shape as wall condition, inside the periodic 2, I want to use MRF to simulate the wind turbine rotate and hope this boundary condition is correct, Now, I stuck on this problem and could not move forward, looking for someone who can save me.