|
[Sponsors] |
Seeking guidance in how to do: Mesh Independence Studies |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
March 4, 2015, 17:16 |
Seeking guidance in how to do: Mesh Independence Studies
|
#1 |
Member
Join Date: Jan 2015
Location: United Kingdom
Posts: 53
Rep Power: 11 |
Dear Experts,
I am so confused with mesh independency studies. According to some I should varies the mesh densities without considering the y+ really much when doing mesh independence and after I get a stable solution (No changes in variable), I then move on the change the mesh side near the BL to capture the details. My question is should I make 5 cases with same y+ but different mesh densities, run it and test the dependency Or run different mesh densities without considering y+(varies for all cases) I was acknowledged that the mesh independence studies is numerically means that the core flow does not change? Let say I keep on discretise it but somehow the different y+ for each cases will affect the solution for monitoring point right? Thanks Regards JL |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] No layers in a small gap | bobburnquist | OpenFOAM Meshing & Mesh Conversion | 6 | August 26, 2015 09:38 |
[snappyHexMesh] SnappyHexMesh no layers and no decent mesh for complex geometry | pizzaspinate | OpenFOAM Meshing & Mesh Conversion | 1 | February 25, 2015 07:05 |
[snappyHexMesh] Layers:problem with curvature | giulio.topazio | OpenFOAM Meshing & Mesh Conversion | 10 | August 22, 2012 09:03 |
Grid Independence of Boundary layer | Luigi_ | Main CFD Forum | 0 | December 14, 2011 13:42 |
Mesh Independence and Y + | sam | FLUENT | 1 | September 13, 2006 05:50 |