|
[Sponsors] |
Airfoil Experimental data - Low Re - Low Mach |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
January 20, 2017, 10:12 |
Airfoil Experimental data - Low Re - Low Mach
|
#1 |
Member
William
Join Date: Aug 2016
Posts: 56
Rep Power: 9 |
Hi,
I'm trying to find some airfoil available with experimental data. I want to use my CFD model to simulate and compare with these results. Preferably I would like some data used in similar condition as my project but I haven't found anything that immediately caught my attention. Mach = 0.04 < 0.1 Velocity = ~ 15 m/s Re = ~165.000 Chord L = ~0.165 m Can any of you tell me where I could find such data? |
|
January 27, 2017, 09:20 |
|
#2 |
Senior Member
Oliver Gloth
Join Date: Mar 2009
Location: Todtnau, Germany
Posts: 121
Rep Power: 17 |
Hi,
take a look at this website: http://m-selig.ae.illinois.edu/ads.html There is a loads of airfoils and quite a few have links to experimental data or reports with testing data. Low speed testing data can also be found here: http://m-selig.ae.illinois.edu/uiuc_lsat.html Hope this helps! Cheers, Oliver |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Comparison of experimental and CFD results for the VA-2 supercritical airfoil | Aurélien | FLUENT | 3 | April 24, 2024 10:39 |
Experimental data for validation of a 2D conv-div nozzle in mach range 0.2-2.0 | DDikeshorn | Main CFD Forum | 0 | January 18, 2017 04:56 |
ABL simulation with experimental data: problems and doubts | Davide_sd | OpenFOAM Running, Solving & CFD | 0 | May 22, 2013 18:35 |
[Commercial meshers] fluentMeshToFoam multidomain mesh conversion problem | Attesz | OpenFOAM Meshing & Mesh Conversion | 12 | May 2, 2013 10:52 |
Experimental data urea-water injection | crevoise | Main CFD Forum | 0 | November 1, 2011 03:44 |