How can I identify (visualize) a named edge in Fluent

julien_g · February 17, 2023, 03:54

Hello,

I work on a 3D geometry in Fluent. I am not an experimeted user.

When I tried to generate the volume mesh, I got this message:

Found overlapping faces sharing edge bn19146-bn19145 (0.022672 0.002485 -0.034629).
How can I find in my geometry this particular edge? I want to see that spot and to identify the part of the geometry which has issues.

Thank you.

AtoHM · February 17, 2023, 04:55

Have a look at x=0.022672 y=0.002485 z=-0.034629 ?

julien_g · February 17, 2023, 05:09

Yes, but how can I navigate automatically to that specific region?
Is there any command to zoom it?

I tried to manually identify that point, but there are hundreds of points and i cannot locate it...

February 17, 2023, 03:54	How can I identify (visualize) a named edge in Fluent	#1
julien_g New Member Join Date: Feb 2023 Location: France Posts: 3 Rep Power: 3	Hello, I work on a 3D geometry in Fluent. I am not an experimeted user. When I tried to generate the volume mesh, I got this message: Found overlapping faces sharing edge bn19146-bn19145 (0.022672 0.002485 -0.034629). How can I find in my geometry this particular edge? I want to see that spot and to identify the part of the geometry which has issues. Thank you.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Error: WorkBench Error: Could not handle event: SolutionStatusUpdate	Kieyo	Fluent Multiphase	0	November 9, 2022 23:58
Named selections not seen in Fluent	theHumbleOne	FLUENT	7	December 5, 2014 06:15
Problem with compile the setParabolicInlet	ivanyao	OpenFOAM Running, Solving & CFD	6	September 5, 2008 20:50
fluent add additional zones for the mesh file	SSL	FLUENT	2	January 26, 2008 11:55
RE: Edge Node distances in Fluent	Ashutosh Joshi	FLUENT	0	December 25, 2000 23:18

February 17, 2023, 04:55		#2
AtoHM Senior Member M Join Date: Dec 2017 Posts: 645 Rep Power: 12	Have a look at x=0.022672 y=0.002485 z=-0.034629 ?

February 17, 2023, 05:09		#3
julien_g New Member Join Date: Feb 2023 Location: France Posts: 3 Rep Power: 3	Yes, but how can I navigate automatically to that specific region? Is there any command to zoom it? I tried to manually identify that point, but there are hundreds of points and i cannot locate it...