|
[Sponsors] |
Request for Assistance with Validation of Ethylene/Air Combustion Mechanism |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
September 13, 2023, 20:26 |
Request for Assistance with Validation of Ethylene/Air Combustion Mechanism
|
#1 |
Member
Niyas
Join Date: Apr 2013
Posts: 45
Rep Power: 13 |
Hello everyone,
I apologize for the lengthy inquiry. I'm currently engaged in the process of validating the combustion mechanism for ethylene/air. Specifically, I'm utilizing three different mechanisms: Mawid.cti, QGMech.cti, and USCMech.cti. Mawid.cti and QGMech.cti were generated based on the reference papers (Mawid,1997 and Jachimowski,1994), while USCMech.cti was sourced from the following web link HTML Code:
https://ignis.usc.edu:80/Mechanisms/USC-Mech%20II/USC_Mech%20II.htm For my analysis, I've employed Cantera 2.6.0 in conjunction with a Jupyter Notebook script (also attached) to generate flame speed results, as depicted in Figure 1 (attached). My concern lies in the observation that the flame speed results exhibit significant disparities. I kindly request assistance from the community to provide insights into the reasons behind this discrepancy. Thank you in advance
__________________
Regards, Niyas |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Incompressible Wing Wind Tunnel Validation Data Request | cosmictrex | Main CFD Forum | 0 | September 30, 2021 02:28 |
Request for Lagrangian Particle Tracking Validation or Verification Paper | Mojtaba.a | OpenFOAM Verification & Validation | 6 | May 23, 2016 01:47 |
[OpenFOAM] Saving ParaFoam views and case | sail | ParaView | 9 | November 25, 2011 15:46 |
[OpenFOAM] Xwindows crash with paraview save | srinath | ParaView | 1 | October 15, 2008 09:37 |
simplified 2step mechanism for kerosene combustion | Srinu | Main CFD Forum | 0 | June 20, 2008 06:29 |