|
[Sponsors] |
August 16, 2001, 15:21 |
SIMPLE Boundary Conditions
|
#1 |
Guest
Posts: n/a
|
If I use the staggered grids and have the half control volumes on the boundary
1.) Would I be putting in some guess values of pressure at that boundary although P correction has to be zero. 2.) Moreover if I specify the guess pressure at the boundary my normal velocity face at that surface and the press. node coincide. Should that be a problem. Do higher Reynolds number (>500) pose a problem if I have a pure iterative scheme (Gauss -Siedel) of solving the equations. Any books as to how to treat the boundaries except for Patankar and Peric as I am not too sure how to specify the velocities and pressure at the boundaries. Thanks in advance. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Questions about the inletOutlet and outletInlet boundary conditions | brooksmoses | OpenFOAM Running, Solving & CFD | 24 | March 2, 2021 01:16 |
mass flow in is not equal to mass flow out | saii | CFX | 12 | March 19, 2018 05:21 |
Impinging Jet Boundary Conditions | Anindya | Main CFD Forum | 25 | February 27, 2016 12:58 |
non reflective boundary conditions for incompresible flow | Pascal_doran | OpenFOAM Programming & Development | 16 | August 25, 2015 05:35 |
Help with boundary conditions | Dan | CFX | 0 | April 3, 2006 11:32 |