|
[Sponsors] |
November 5, 2004, 03:14 |
question about compressible turbulece
|
#1 |
Guest
Posts: n/a
|
dear all
if i know the REx number , how to set the friction coefficient and boundary layer thickness, displament thickness, momentum thickness, and shape factor? how to set the inflow condition of flat plate boundary layer? i have no the DNS data , can i do simulation of turbulent BL. thanks. |
|
November 5, 2004, 03:33 |
Re: question about compressible turbulece
|
#2 |
Guest
Posts: n/a
|
if i want to simulate a supersonic flat plate bound layer with M=1.5 Re=1.e6, and i do not want to capture the shock wave because of my MaccorMack code , which thickness is important? how to define this? can i set a friction coefficient and then solve three thickness?
|
|
November 6, 2004, 23:09 |
Re: question about compressible turbulece
|
#3 |
Guest
Posts: n/a
|
For N-S equations, you need not give boundary thickness.
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
PEqnflux in compressible and incompressible PISO loop | dbxmcf | OpenFOAM Running, Solving & CFD | 3 | September 27, 2019 06:13 |
Compressible turbulent multicomponent nonreacting flow | rbw | OpenFOAM Running, Solving & CFD | 2 | March 23, 2016 21:22 |
compressible flow | maria teresa | FLUENT | 1 | September 7, 2007 16:58 |
Transient inflow boundary condition for compressible flow | hoogland | OpenFOAM Running, Solving & CFD | 1 | April 16, 2007 18:34 |
Turbulent compressible and subsonic gas flow | Rasmus Gjesing (Gjesing) | OpenFOAM Running, Solving & CFD | 42 | May 30, 2005 13:38 |