Help with a shell-volume mesh in ICEM-CFD

luissanchez · June 13, 2016, 12:11

Hello, comunity. Actually i´m making a finite element mesh with icem cfd. This mesh need to combine shell elements (vaults for example) with volume elements such as walls.

I have generate the volume mesh with the octree algorithm and i need to generate the shell elements of the rest of the parts how can i proceed?

https://mega.nz/#!AJgFlaZS!vZB04UvSq...BecObZl6sN5BHc

Attached you can find a screenshot of a part of the total body. I have a volume mesh with the octree aproach and i need sheel elements (consitent with the volume elements) on the dome (green part).

Thanks, Luis

silambarasan7 · June 26, 2017, 01:37

Hi,
Did you solve it ? No means, let me know your requirement..

Regards,
Sila

June 13, 2016, 12:11	Help with a shell-volume mesh in ICEM-CFD	#1
luissanchez New Member Luis Join Date: Jun 2013 Posts: 5 Rep Power: 12	Hello, comunity. Actually i´m making a finite element mesh with icem cfd. This mesh need to combine shell elements (vaults for example) with volume elements such as walls. I have generate the volume mesh with the octree algorithm and i need to generate the shell elements of the rest of the parts how can i proceed? https://mega.nz/#!AJgFlaZS!vZB04UvSq...BecObZl6sN5BHc Attached you can find a screenshot of a part of the total body. I have a volume mesh with the octree aproach and i need sheel elements (consitent with the volume elements) on the dome (green part). Thanks, Luis

June 26, 2017, 01:37	ICEM Mesh expert	#2
silambarasan7 Member sila Join Date: Jul 2013 Posts: 32 Rep Power: 12	Hi, Did you solve it ? No means, let me know your requirement.. Regards, Sila

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[mesh manipulation] Importing Multiple Meshes	thomasnwalshiii	OpenFOAM Meshing & Mesh Conversion	18	December 19, 2015 18:57
[ICEM] Negative volume error in hybrid mesh	siw	ANSYS Meshing & Geometry	4	September 3, 2014 05:25
Problem of simulating of small droplet with radius of 2mm	liguifan	OpenFOAM Running, Solving & CFD	5	June 3, 2014 02:53
Transport mesh from ICEM CFD, to Fluent, to Sysnoise	Wieland	FLUENT	2	April 15, 2012 06:28
On the damBreak4phaseFine cases	paean	OpenFOAM Running, Solving & CFD	0	November 14, 2008 21:14