[Neb]

Hi,
I am using solids4foam on openfoam-7. I need to restart my simulation but I get the following error.
I also have another question: in restarting the tutorial I notice that the forces exchanged in the fluid interface are different from those of the solid interface. Is this normal to happen?
Thanks for help.
S.M.

Selecting physicsModel fluidSolidInteraction

Selecting fluidSolidInterface method fixedRelaxation

Selecting fluidModel pimpleFluid
Selecting dynamicFvMesh dynamicMotionSolverFvMesh
Selecting motion solver: velocityLaplacian
Selecting motion diffusion: quadratic
Selecting motion diffusion: inverseDistance
Reading g from constant directory
Using dynamicCode for patch Inlet on field U at line 28 in "/home/prova/processor0/2/fluid/U.boundaryField.Inlet"
Using dynamicCode for patch Outlet on field p at line 32 in "/home/prova/processor0/2/fluid/p.boundaryField.Outlet"
Selecting incompressible transport model Newtonian
Selecting turbulence model type RAS
Selecting RAS turbulence model kEpsilon

PIMPLE: No convergence criteria found


PIMPLE: Operating solver in transient mode with 1 outer corrector
PIMPLE: Operating solver in PISO mode


Constructing face velocity Uf

Selecting solidModel linearGeometry
Selecting dynamicFvMesh staticFvMesh
Creating solidTraction boundary condition
[10] 
[10] 
[10] --> FOAM FATAL IO ERROR: 
[10] compound has already been transferred from token
    on line 51 the empty compound of type List<vector>
[10] 
[10] file: /home/prova/processor10/2/solid/DD.boundaryField.Inlet_solido.value at line 51.
[10] 
[10]     From function Foam::token::compound& Foam::token::transferCompoundToken(const Foam::Istream&)
[10]     in file lnInclude/token.C at line 99.
[10] 
FOAM parallel run aborting
[10] 
[10] #0  Foam::error::printStack(Foam::Ostream&)[11] 
[11] 
[11] --> FOAM FATAL IO ERROR: 
[11] compound has already been transferred from token
    on line 51 the empty compound of type List<vector>
[11] 
[11] file: /home/prova/processor11/2/solid/DD.boundaryField.Inlet_solido.value at line 51.
[11] 
[11]     From function Foam::token::compound& Foam::token::transferCompoundToken(const Foam::Istream&)
[11]     in file lnInclude/token.C at line 99.
[11] 
FOAM parallel run aborting
[11] 
[11] #0  Foam::error::printStack(Foam::Ostream&) addr2line failed
[10] #1  Foam::IOerror::abort() addr2line failed
[10] #2  Foam::token::transferCompoundToken(Foam::Istream const&) addr2line failed
[10] #3  Foam::Istream& Foam::operator>><Foam::Vector<double> >(Foam::Istream&, Foam::List<Foam::Vector<double> >&) addr2line failed
[10] #4  Foam::Field<Foam::Vector<double> >::Field(Foam::word const&, Foam::dictionary const&, int) addr2line failed
[10] #5  Foam::fixedDisplacementZeroShearFvPatchVectorField::fixedDisplacementZeroShearFvPatchVectorField(Foam::fvPatch const&, Foam::DimensionedField<Foam::Vector<double>, Foam::volMesh> const&, Foam::dictionary const&) addr2line failed
[10] #6  Foam::fvPatchField<Foam::Vector<double> >::adddictionaryConstructorToTable<Foam::fixedDisplacementZeroShearFvPatchVectorField>::New(Foam::fvPatch const&, Foam::DimensionedField<Foam::Vector<double>, Foam::volMesh> const&, Foam::dictionary const&) addr2line failed
[10] #7  Foam::fvPatchField<Foam::Vector<double> >::New(Foam::fvPatch const&,