[Nick_civ]

P { margin-bottom: 0.08in; } Hi Neils,

I am trying to simulate a case in which an object (e.g. breakwater) is inserted into the waveFlume just before the relaxation zone. I created an STL file and i executed
1. blockMesh
2. Snappyhexmesh - overwrite
3. Create the new boundary in 0 dir
3. Extrudemesh
4. Delete some files from Polymesh
5. waveGaugesNProbes
6. setWaveField
but when i run it, it doesn't work - here s the output

No finite volume options present

time step continuity errors : sum local = 0, global = 0, cumulative = 0
GAMG: Solving for pcorr, Initial residual = 0, Final residual = 0, No Iterations 0
GAMG: Solving for pcorr, Initial residual = 0, Final residual = 0, No Iterations 0
time step continuity errors : sum local = 0, global = 0, cumulative = 0
Courant Number mean: 0 max: 0

Starting time loop

Courant Number mean: 0 max: 0
Interface Courant Number mean: 0 max: 0
deltaT = 0.0011976
Time = 0.0011976

MULES: Solving for alpha1
Phase-1 volume fraction = 0.217392 Min(alpha1) = 0 Max(alpha1) = 1
#0 Foam::error:rintStack(Foam::Ostream&) in "/opt/openfoam222/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
#1 Foam::sigFpe::sigHandler(int) in "/opt/openfoam222/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
#2 in "/lib/x86_64-linux-gnu/libc.so.6"
#3 Foam::relaxationSchemes::relaxationSchemeSpatial:: correct() in "/home/nikos/OpenFOAM/nikos-2.2.2/platforms/linux64GccDPOpt/lib/libwaves2Foam.so"
#4 Foam::relaxationZone::correct() in "/home/nikos/OpenFOAM/nikos-2.2.2/platforms/linux64GccDPOpt/lib/libwaves2Foam.so"
#5
in "/home/nikos/OpenFOAM/nikos-2.2.2/platforms/linux64GccDPOpt/bin/waveFoam"
#6 __libc_start_main in "/lib/x86_64-linux-gnu/libc.so.6"
#7
in "/home/nikos/OpenFOAM/nikos-2.2.2/platforms/linux64GccDPOpt/bin/waveFoam"
Floating point exception (core dumped)

I attached the case and i would be grateful if you took a look. (I didn't attach Postprocessed2foam, surfaceElevationAnyname and wavegaugesnprobes. Also, 0 directory's files include the new boundary condition of breakwater and they are just before running and the stl file in the triface is txt due to upload limit here)

Thank you in advance.
Nick