|
[Sponsors] |
[OpenFOAM.org] Compile OF 2.3 on Mac OS X .... the patch |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
February 19, 2014, 18:39 |
Compile OF 2.3 on Mac OS X .... the patch
|
#1 |
Assistant Moderator
Bernhard Gschaider
Join Date: Mar 2009
Posts: 4,225
Rep Power: 51 |
Hi!
With a 2 day delay after OF 2.3 was released here comes the patch for Mac OS X. This time I decided to distribute it differently: it is found in the OF-extend SVN-repository at http://sourceforge.net/p/openfoam-ex...ches/MacPatch/ This should make sure that always the latest patch is found in the same location. People who have been through the Mac-patch cycle several times will notice the absence of a ThirdParty-patch: the reason is that all the necessary third-party software (CGAL, metis, scotch) is available at MacPorts with a simple "port install"-command. This is also the recommended way to install the necessary compiler and MacPorts. As a guidline for installation have a look at http://openfoamwiki.net/index.php/In...OpenFOAM_2.2.2 but check the README first for differences. It is possible that I forgot necessary packages to install via MacPorts. So whoever wants to write an updated recipe for installation ... Compared to previous patches the patch has the enhancements described in http://www.cfd-online.com/Forums/ope...tml#post475721 Also the code that produces the stack-traces has been partially rewritten and some ugly hacks have been removed (should work with OS X 10.5 or later)
__________________
Note: I don't use "Friend"-feature on this forum out of principle. Ah. And by the way: I'm not on Facebook either. So don't be offended if I don't accept your invitation/friend request |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[Other] dynamicTopoFVMesh and pointDisplacement | RandomUser | OpenFOAM Meshing & Mesh Conversion | 6 | April 26, 2018 07:30 |
Near wall treatment in k-omega SST | Arnoldinho | OpenFOAM Running, Solving & CFD | 38 | March 8, 2017 13:48 |
[mesh manipulation] Importing Multiple Meshes | thomasnwalshiii | OpenFOAM Meshing & Mesh Conversion | 18 | December 19, 2015 18:57 |
createPatch Segmentation Fault (CORE DUMPED) | sam.ho | OpenFOAM Pre-Processing | 2 | April 21, 2014 02:01 |
[Gmsh] Import gmsh msh to Foam | adorean | OpenFOAM Meshing & Mesh Conversion | 24 | April 27, 2005 08:19 |