[jet_engine]

Hi, I was trying to run a case with buoyantBoussinesqSimpleFoam and it kept giving me the following error:

Reading thermophysical properties

Reading field T

Using dynamicCode for patch slipWall on field T at line 44 in "/home/username/Downloads/case_name/0/T.boundaryField.slipWall"
Could not load "/home/username/Downloads/case_name/dynamicCode/platforms/linux64GccDPInt32Opt/lib/libcustomSlipWall_f1f1ebc50acbbc2a63e2b97341909b084905be35.so"
/home/username/Downloads/case_name/dynamicCode/platforms/linux64GccDPInt32Opt/lib/libcustomSlipWall_f1f1ebc50acbbc2a63e2b97341909b084905be35.so: cannot open shared object file: No such file or directory
Creating new library in "dynamicCode/customSlipWall/platforms/linux64GccDPInt32Opt/lib/libcustomSlipWall_f1f1ebc50acbbc2a63e2b97341909b084905be35.so"
Invoking wmake libso /home/username/Downloads/case_name/dynamicCode/customSlipWall


--> FOAM FATAL ERROR: (openfoam-2112)
exec(wmake, ...) failed

    From int Foam::system(const Foam::CStringList&, bool)
    in file POSIX.C at line 1638.

FOAM exiting


error::stream() : error stream has failed


�%�MV(openfoam-2112)


    From void Foam::codedBase::createLibrary(Foam::dynamicCode&, const Foam::dynamicCodeContext&) const
    in file db/dynamicLibrary/codedBase/codedBase.C at line 240.

FOAM aborting

I've been checking the forum to see if anyone had a similar issue. Here's the list of things I've tried so far:

1. Installing make (sudo apt-get install make)
2. Installing gcc (sudo apt-get install gcc)
3. Adding the following lines to the bashrc file: . /usr/lib/openfoam/openfoam2112/etc/bashrc and source /usr/lib/openfoam/openfoam2112/etc/bashrc
4. sudo apt install build-essential flex bison
5. Installing the complete version of openfoam v2112 from the repo

And nothing has worked so far. Does anyone know what may be causing this issue? I can run other solvers but for some reason it won't let me run buoyantBoussinesqSimpleFoam.


Thanks in advance!


Oh and btw here's the bit of the 0/T file where it crashes:

slipWall
    {
        type            codedFixedValue;
        value          uniform 0;
        name          customSlipWall;
   
        code
        #{
            scalarField& field = *this; 
            scalar Twall  = 1;
            scalar lambda = 0.01;
            scalar sigma  = 1;
            scalar Pr     = 0.71;
            scalar gamma  = 1.4;
            scalar rlx    = 0.95;

            // DT/dn
            scalarField gradient = this->snGrad();

            field = rlx*(*this) + (1-rlx)*(Twall - lambda/Pr*(2-sigma)/sigma*2*gamma/(gamma+1)*gradient);
        #};         

        codeOptions
        #{
                -I$(LIB_SRC)/finiteVolume/lnInclude \
                -I$(LIB_SRC)/meshTools/lnInclude
        #};

        codeInclude
        #{
            #include "fvCFD.H"
            #include <cmath>
            #include <iostream>
        #};
    }

Line 44 is: name customSlipWall;