|
[Sponsors] |
November 13, 2009, 10:04 |
update turbDyMFoam
|
#1 |
Member
antonio segalini
Join Date: Mar 2009
Posts: 75
Rep Power: 17 |
Hi foamers,
i just have installed openfoam-dev with the debian installation. It worked out quicky and easily. Now i want to run a acse i did 6 months ago with a rotating sliding mesh and the solver turbDyMFoam says that it doesn't find the topo changer mixerFvMesh. This is ok. In the old version i have compiled (it was still OF-dev-1.5) i just had to add the library lengine. Here i tried but there is no application folder with the code of turbDyMFoam. Where can i update my turbDyMFoam solver? I tried also to download from the powerlab the dev version and compile it, but when i update the bashrc, it get stucked in an error: cfduser-dev@antonio-desktop:~/OpenFOAM/OpenFOAM-1.5-dev$ . ~/.bashrc -bash: /home/cfduser-dev/OpenFOAM/OpenFOAM-1.5-dev/etc/bashrc: line 188: syntax error near unexpected token `<<<' -bash: /home/cfduser-dev/OpenFOAM/OpenFOAM-1.5-dev/etc/bashrc: line 188: `<<<<<<< .mine' suggestions? thanks in advance |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Dynamic mesh update problem. | David | FLUENT | 3 | March 15, 2012 05:02 |
update the pyhsicaltimestep during a steady-state-run | mvoss | CFX | 4 | April 6, 2009 03:08 |
starCD version update | hervé | Siemens | 6 | March 3, 2008 19:04 |
ICEM geometry update | Omar | CFX | 0 | July 4, 2007 15:55 |
time taken to update solution in unsteady flow | phil | FLUENT | 6 | May 17, 2004 10:12 |