[Commercial meshers] Creating GAMBIT mesh as multi-region for chtMultiRegion*Foam in OpenFOAM

sa har · April 2, 2015, 04:10

hi,i have geometry in gambit (2D) that it has 3 face (2fluid 1 solid).how can i make 3 distinct regions for chtMultiRegion*.* solvers?

roadRunner · April 20, 2015, 08:40

In Gambit, there is an option to define a "zone" or something like that, it's in the same menu where you set boundary conditions, just the other button.

From there you could probably set multiple mesh regions (i.e. fluid1, flud2 etc).

Then export .msh and fluentMeshToFoam. (or 2D in your case). After that I have no experience.

I hope it helps

April 2, 2015, 04:10	*Creating GAMBIT mesh as multi-region for chtMultiRegionFoam in OpenFOAM**	#1
sa har Member sa har Join Date: Aug 2014 Posts: 34 Rep Power: 12	hi,i have geometry in gambit (2D) that it has 3 face (2fluid 1 solid).how can i make 3 distinct regions for chtMultiRegion. solvers?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[snappyHexMesh] Creating multiple multiple cell zones with snappyHexMesh - a newbie in deep water!	divergence	OpenFOAM Meshing & Mesh Conversion	0	January 23, 2019 05:17
Creating a axi-symmetric mesh for OpenFOAM	AnthonyP	GridPro	2	December 27, 2018 13:51
[Commercial meshers] Exporting to OpenFOAM mesh with "inner" wall region	raagh77	OpenFOAM Meshing & Mesh Conversion	0	April 24, 2012 07:23
[Gmsh] 2D Mesh Generation Tutorial for GMSH	aeroslacker	OpenFOAM Meshing & Mesh Conversion	12	January 19, 2012 04:52
[Other] StarToFoam error	Kart	OpenFOAM Meshing & Mesh Conversion	1	February 4, 2010 05:38

April 20, 2015, 08:40		#2
roadRunner Member Join Date: Apr 2015 Location: EU Posts: 38 Rep Power: 11	In Gambit, there is an option to define a "zone" or something like that, it's in the same menu where you set boundary conditions, just the other button. From there you could probably set multiple mesh regions (i.e. fluid1, flud2 etc). Then export .msh and fluentMeshToFoam. (or 2D in your case). After that I have no experience. I hope it helps