|
[Sponsors] |
[snappyHexMesh] SHM - Change tolerance to deal with gaps in CAD geom |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
March 20, 2016, 17:58 |
SHM - Change tolerance to deal with gaps in CAD geom
|
#1 |
Member
Lisandro Maders
Join Date: Feb 2013
Posts: 98
Rep Power: 13 |
Hi,
I have a geometry which has some gap in the CAD, but I am not able to edit this. Is there any way to change tolerance in snappyHexMesh in order to make such gaps invisible to the mesh generator? The problem is that I have fluid inside this geometry, and I should not. The figure shows the geometry. In the top, it was well recognized, but the bottom part of the engine it was meshed inside it.. Best regards, Lisandro |
|
Tags |
gap, snappyhexmesh, tolerance, tolerance change |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] surfaceAutoPatch generate internal faces so SHM doesnot read the whole CAD | rsa | OpenFOAM Meshing & Mesh Conversion | 0 | March 7, 2019 07:03 |
[CAD formats] CAD export for SHM | plucas | OpenFOAM Meshing & Mesh Conversion | 0 | January 17, 2019 10:43 |
CHT-Problem: Gaps and intersections in CAD | Zhudasch | ANSA | 1 | October 23, 2017 08:32 |
Importing CAD geometry and Editing edges to match | Ahmed | CFX | 15 | March 21, 2016 12:39 |
which program in phoenics can change CAD file | Xyj | Phoenics | 4 | May 29, 2001 06:48 |