|
[Sponsors] |
[snappyHexMesh] Error "keyword meshQualityControls is undefined" while meshing with snappyHexMesh |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
November 21, 2016, 06:05 |
Error "keyword meshQualityControls is undefined" while meshing with snappyHexMesh
|
#1 |
New Member
Alexandre
Join Date: Nov 2016
Posts: 5
Rep Power: 9 |
Hi,
I'm quite new on the OpenFOAM software and I'm using it for a project during my internship. I'm actually working on OpenFOAM 2.1.1 and I wanted to mesh a part like the one in the propeller tutorial but a simpler one in order to try it by myself. The thing is that after doing "blockMesh" and "surfaceFeatureExtract" when I start to mesh, the following error occurs : [1] --> FOAM FATAL IO ERROR: [1] keyword meshQualityControls is undefined in dictionary "/home/berrichon/OpenFOAM/Test_AMI_2/processor1/system/snappyHexMeshDict" [1] [1] file: /home/berrichon/OpenFOAM/Test_AMI_2/processor1/system/snappyHexMeshDict from line 0 to line 0. [1] [1] From function dictionary::subDict(const word& keyword) [1] in file db/dictionary/dictionary.C at line 479. [1] FOAM parallel run exiting I've already searched for some similar errors in the forum and on google but it didn't help me. I know what the error says but in my snappyHexMesh file there is the meshQualityControls with all the keywords. I checked on the user guide every keyword that should be define there and they are all here. I tried to change some values but without any success. I attached the snappyHexMesh file if you want to check it. Maybe the error comes from my geometry / .stl files ? Or should I use .obj files ? Thank You Regards |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] Problems with scaling meshes when meshing with SnappyHexmesh | Bnitter | OpenFOAM Meshing & Mesh Conversion | 1 | November 15, 2018 08:26 |
LiencubiclowRemodel | nzy102 | OpenFOAM Bugs | 14 | January 10, 2012 08:53 |
OpenFoam-1.7.x on Suse 11.2 (64bit) does not compile | val46 | OpenFOAM Installation | 4 | August 27, 2010 03:43 |
G95 + CGNS | Bruno | Main CFD Forum | 1 | January 30, 2007 00:34 |
Building OpenFoAm on SGI Altix 64bits | anne | OpenFOAM Installation | 8 | June 15, 2006 09:27 |