|
[Sponsors] |
[snappyHexMesh] refine region using snappyHexMaes |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
November 29, 2016, 07:37 |
refine region using snappyHexMaes
|
#1 |
New Member
Mousa Hemmati
Join Date: Nov 2016
Location: Iran, Ilam
Posts: 8
Rep Power: 9 |
Hi all.
I trying to add refinement regions to my mesh by using snappyHexMesh but for some reason it doesn't let me do that.The slop of spillway is 2.5v: 1.5h, and length and high of steep are 7.5cm and 12.5cm. please see my "blockMeshDict", "stl file " and "snappyHexMeshDict" files attached. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Problem simulating the temperature rise in a composite material (chtMultiRegionFoam) | Adam_K | OpenFOAM Running, Solving & CFD | 2 | March 27, 2019 06:51 |
[mesh manipulation] Importing Multiple Meshes | thomasnwalshiii | OpenFOAM Meshing & Mesh Conversion | 18 | December 19, 2015 18:57 |
[Commercial meshers] Using starToFoam | clo | OpenFOAM Meshing & Mesh Conversion | 33 | September 26, 2012 04:04 |
[Other] StarToFoam error | Kart | OpenFOAM Meshing & Mesh Conversion | 1 | February 4, 2010 04:38 |
[Gmsh] Import gmsh msh to Foam | adorean | OpenFOAM Meshing & Mesh Conversion | 24 | April 27, 2005 08:19 |