[yuwen zhang]

Hello there, I am a beginner to openFoam and GMSH. I am working on a 3D simulation of E387 wing at the moment. I have been given the coordinate points and from there I create the 2D surface and the extrusion of the 2D surface becomes my 3D wing. For the meshing, I used a C-grid and it is created from forming 2 quarter circle and rotate 90 degrees, followed by extrusion using the rotated surfaces.

I have created a coarse grid and the mesh is shown below,

Screen Shot 2019-02-27 at 10.22.54 pm.png

Screen Shot 2019-02-27 at 10.22.07 pm.png

I then exported the msh to openFoam, and after running gmshToFoam command, it killed itself during the progress,

" Mapping region 1 to Foam patch 0
Mapping region 2 to Foam patch 1
Mapping region 3 to Foam patch 2
Mapping region 4 to Foam cellZone 0
Cells:
total:4735955
hex :0
prism:0
pyr :0
tet :4735955

CellZones:
Zone Size
0 4735955

Skipping tag at line 5564051
Patch 0 gets name Symmetry
Patch 1 gets name Farfield
Patch 2 gets name Airfoil

Killed
OpenFOAM-6(520) "


I have attached both my geo files to create the mesh, and the openfoam 0, constant and system files below for your reference.

Please enlighten me what could be the reason for this issue and how can I solve it ? Thank you in advance !

Archive 2.zip (geo files)

Archive.zip (openfoam)